6 Inch BLACK+DECKER BCCS320C1 Pruning Chainsaw Chain

6-inch replacement chain fitment for the BLACK+DECKER BCCS320C1

This replacement chain is made for the BLACK+DECKER BCCS320C1 pruning saw with a 6-inch bar. Based on the original listing, it is a 6” Pruning Chain Replacement for BLACK+DECKER BCCS320C1 Chainsaw and is not intended as a universal fit for other compact saws.

The package includes 2Pcs 6-Inch Chain, which is helpful if you want to keep a spare ready for quick swap-outs between jobs.

Will this chain fit your saw?

This chain is specifically described as fitting the BLACK+DECKER BCCS320C1 Pruning Saw only. The most important fitment check is the exact saw model number on the tool label or housing: it should read BLACK+DECKER BCCS320C1.

You should also confirm the basics of chain fitment before ordering:

• Bar length: 6”
• Saw model: BLACK+DECKER BCCS320C1
• Chain sizing details: pitch, gauge, and drive-link count should match your original chain

For any chainsaw chain, those last three measurements matter just as much as bar length. Many homeowners assume that any 6-inch chain will fit any 6-inch saw, but that is not the case. Two chains can both be labeled 6-inch and still differ in pitch, gauge, or drive-link count, making them incompatible.

Because the original listing is very clear, this replacement should be treated as model-specific:

• Compatible model: BLACK+DECKER BCCS320C1
• Product type: 6” Pruning Chain Replacement for BLACK+DECKER BCCS320C1 Chainsaw

Just as important, the listing also states that this 6 Inch Chainsaw chain is ONLY for BLACK+DECKER BCCS320C1 Pruning Saw, other 6-inch chainsaws are not compatible, please check the model before purchase.

If your saw is a different BLACK+DECKER model, or a 6-inch pruning saw from another brand, do not assume fit based on bar length alone. Match the exact model first, then compare the chain specs from your original chain or owner’s manual if needed.

Replacing the chain

Replacing a small pruning chain is straightforward, but safety comes first.

1. Power the saw off completely and remove the battery before touching the chain or bar.
2. Let the saw cool down, then loosen the side cover or chain-retention hardware according to your saw’s manual.
3. Remove the old chain and note its cutting direction before installing the new one. The sharp cutting edges on the top of the bar should face forward.
4. Seat the new chain into the bar groove and around the drive sprocket, making sure it sits evenly all the way around.
5. Reinstall the cover and adjust chain tension so the chain is snug but can still be pulled around the bar by hand with a gloved hand.
6. Reinstall the battery and run the saw briefly, then recheck tension before cutting.

A new chain can stretch slightly during initial use, so it is a good idea to check tension again after the first few cuts.

Keeping it sharp

A sharp chain cuts faster, puts less strain on the saw, and is safer to use.

• Avoid contacting dirt, rocks, fencing, or the ground while pruning. Even brief contact can dull a small chain quickly.
• Keep the chain properly tensioned. A chain that is too loose can derail; too tight can wear the bar and drive components faster.
• If cutting performance drops and you need to force the saw through wood, stop and inspect the chain. That is often the first sign it needs sharpening or replacement.

FAQ

Does this fit any 6-inch chainsaw?

No. The original listing states that this chain is only for the BLACK+DECKER BCCS320C1 Pruning Saw. Other 6-inch chainsaws are not compatible.

How many chains are included?

The package includes 2Pcs 6-Inch Chain, so you receive two replacement chains.

Do I only need to match the 6-inch bar length?

No. Bar length is only one part of fitment. You should also match the exact saw model and confirm the pitch, gauge, and drive-link count against your original chain.

What is the compatible model for this chain?

The listed compatible saw model is BLACK+DECKER BCCS320C1.